Firm representation.
1998-99
– enterprise creating and start of manufacturing process. Specialty – development
and manufacture of precise means of measurement and control of temperature,
pressure, flow rate and volume of liquids and gases, heat energy. All manufactured
equipment characterized by high service and metrological reliability, battery
operating with long service life, standard all-whether execution with ambient
temperature from minus 30 up to +60°Ñ, 5 years guarantee for most of all production.
Research-and-production enterprise
MEASURING TECHNOLOGIES


· The Heat & Flow Meter X12
is not only a meter of water or thermal energy.
· The possibility of a precise measurement and control of flow, pressure, temperature, heat and cold energy
in pipelines with diameters from 20 mm up to 1.000 mm. With possibility to con-trol
the installations by means of electro driving valves and pumps.
· The fields of applications are very wide. Our solution can be utilized in open and closed
heat supply systems, water metering in domestic and industrial applications;
in industrial proc-esses a.o. in chemical, food and electric industry and last
but not least, in the oil and gas in-dustries. The care we brought to its conception
allows us today to use the X12 in oil mining applica-tions, were it can support
pressures up to 500 atm.
· X12 can be equipped with up to six flow sensors, with up to six temperature sensors and up to two pressure sensors. Its fantastic
potential allows you to manage, at once, functions, which re-quire normally
several installations. This is bringing you money and time savings: only one
de-vice, one installation and one maintenance.
· X12 is built on a programmable modular philosophy, allowing the customer a selection among 12 modules to match
his requirements. Up to eight modules can be organized simulta-neously in one
meter. Each module - independent measuring device in frames of X12. Such flexibility
and functional possibilities are providing entire satis-faction to the cli-ents.
A customer receives the right necessary ordered.
· All registered data can be dispatched to your control station by cable, modem, GSM or inter-net com-munication.
Data can also be collected with a single laptop or a hand-held terminal via
cable or infra-red.
· In one X12: meters of heat and cold energy, water meters,
flow meter for high pressure applications, digital pressure meters, digital
thermometers.
· High quality and reliability: 5 years guarantee. The calibration interval is 4 years.
· The all-whether meter execution (standard): the ambient temperature is from minus 30 up to +60°Ñ.
· Low price for high quality.
· Language choice: English, Russian, Ukrainian, others on request.
· Meter corresponds to European EN 1434 (classes 1 and 2) and Ukrainian DSTU-3339 (class 2,5) standards
for heat meters, Ukrainian standards DSTU 3580 and DSTU 3709 (exceeding of class
B) for the cold and hot water meters.
· Unique flow measurement possibility with six acoustic elements ultrasonic sensor, which is absolutely not equivalent
to three independent popular two-element ultrasonic sensors in reliability,
accuracy, working flow range, minimal length of straight sites at a place of
installation. Flow sensors with two acoustic elements are also available in
models of X12.
· In-built battery supply with service time up to 12 years without expensive additional devices, like accumulators or Uninterrupted Power Supplies.
· Free in-built flow rate simulator: full scheme of dry verification, including
the all represented components: calculator + flow sensor with real liquid -
guarantees the accuracy of metrological checking and of tests at a place of
installation.
· High reliability: started from calculator enclosure with protection
degree IP65, sensors with IP65…68, Swiss made electrical connectors with guaranteed
5000 cycles of connection-disconnection, temperature sensors PT-1000, working
temperature of sensors up to 170°Ñ, working pressure of sensors with 25…500
atm. and finished with high quality of meter assembling.
· Complete set of standard delivery.
· Minimal length of straight sites at a place of installation: in
some the cases straight sites are not required at all.
· Additional service: paid only a meter, during a total time of meter operation the customer receives
free consultations and service programs from web site and also a possibility
of internal software upgrade.
· Cheap montage: absence of a necessity for the liquid filters installation caused that it's quality: pollution, desalination,
presence of magnetite, electric conductivity - does not render an influence
on a process of measurement and it results. Flow sensors with conic flanges
allow a compact installation on the pipelines of larger nominal diameters.
·Standard solutions for nonstandard tasks: intrinsic safety execution, computer,
phone, radio and internet communication with meter, installations for working
pressures up to 500 atm., possibility of vertical and horizontal sensor installations,
possibility with proper modules selection to form optimal variant for economy.
· Several thousands of Meters Õ12 are installed in the different regions of
Ukraine and CIS. More than 120 enterprises are always ready to sell and to install
Meter X12
Additional
equipment and services

Adapter X12A

Transducer RS232
Software
for PC
|
Heat
& Flow meter X12

Calculator X12
Flow sensor
Temperature sensor
Pressure sensor |